Plastic Welder(TM)

1. Apply mixed product directly to one surface in an even film or as a bead.
Instructions: 2. Assemble with mating part within recommended working time.
3. Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of product should
flow out the edges to display adequate gap fill.)
4. Bond line thickness of mixed adhesive should be @ .015”-.030” for optimum adhesion.
For very large gaps:
1. Apply product to both surfaces
2. Spread to cover entire area OR make a bead pattern to allow flow throughout the joint
Let bonded assemblies stand for recommended functional cure time prior to handling.
ADDITIONAL PRODUCT INFORMATION:
- Can withstand processing forces
- Do not drop, shock load, or heavily load
- Intermittent exposure to temperatures above 250°F do not reduce performance characteristics
STAINLESS STEEL AND ALUMINUM APPLICATIONS:
Apply Devcon Metal Prep 90 to prime and condition aluminum and stainless steel surfaces prior to using Plastic Welder.
Metal Prep 90 is fast drying at ambient temperatures. Plastic Welder can be applied within minutes of its use. Overlap
shear strength will improve 30-40% if Metal Prep 90 is used.