SMT red plastic (agent Fujitsu Series)

Fuji original red plastic NE8800T/NE3000S/NE8800K
SMT lines dedicated one component of the heat curing epoxy resin adhesive, with

1. Storage stability, ease of use

2. Fast curing, high strength

3. Thixotropy good electrical insulation properties. ... And so on.

This product is mainly used for chip resistors, capacitors, IC chip mount technology for dispensing and scraping gum.

■ Features

①, allowing low-temperature curing;

②, despite the high-speed coating, micro small amount of coating can be maintained without any drawing, the shape stability of collapse;

③, adhesive parts for a variety of shows that are available to the stability of the adhesive strength;

④, storage stability and excellent performance;

⑤, with high heat resistance and excellent electrical properties;

⑥, can also be used for printing.

■ Curing conditions

○ 8800K: recommended hardening temperature of the substrate surface condition is 150 ℃ after 60 seconds, after 100 seconds to reach 150 ℃;

○ 8800T: recommended hardening temperature of the substrate surface condition is 150 ℃ after 45 seconds, after 100 seconds to reach 150 ℃;

○ the higher the curing temperature and curing time, the longer the height of the intensity of the more available;

○ part by containing the size of the substrate, and filled with different positions, the actual adhesive attached to the temperature change, so need to find the most suitable curing conditions.

■ Use

○ In order to maximize the characteristics of adhesive effect, be sure to place the refrigerator (2 ℃ ~ 10 ℃) preserved;

○ removed from the refrigerator to use when the temperature until the adhesive fully restored to room temperature before use;

○ If the hose at the point of dispensing by adding the amount of the plunger can be made more stable;

○ drawing for the relationship to prevent the most appropriate dispensing temperature is set 30 ℃ ~ 38 ℃;

○ filling the hose from the cylinder, please use our private automatic filling machines, in order to prevent infiltration of air bubbles;

○ For a point of washing hose using DBE or ethyl acetate.

■ Curing conditions curve

No picture

■ Characteristics

NE8800K NE8800T

Component epoxy resin: Epoxy resin Epoxy resin: Epoxy resin

Appearance of the red paste: Paste / red-colored red paste: Paste / red-colored

Weight 1.28 1.33

James degrees 300Pa.S (300,000 cps) 310Pa.S (310,000 cps)

Control variability index 6.8 (1rpm/10rpm) 6.3 (1rpm/10rpm)

Stained intensity of 44N (4.5kgf) 0.2mgr twin

45N (4.6kgf) 0.2mgr twin

92N (9.4kgf) 0.8mgr singleX2 44N (4.6kgf) 0.2mgr twin

43N (4.4kgf) 0.4mgr twin

90N (9.2kgf) 1.25mgr singleX2

Electrical Characteristics

Volume resistance 2.6X10 ^ 16Ω.cm 4.5X10 ^ 16Ω.cm

Initial insulation resistance coefficient of 1.0X10 ^ 14Ω 9.6X10 ^ 13Ω

Insulation resistance factor treatment * 1.2X10 ^ 12Ω 3.0X10 ^ 12Ω

K 3.62/1MH 3.7/1MH

Dielectric is then 0.013/1MH 0.016/1MH

Storage conditions 2 ℃ ~ 10 ℃ following refrigerator

To be strictly kept at 2 ℃ ~ 10 ℃ in refrigerator

■ Package

Packing form

Package styles capacity

Contents packaging unit

Package Unit dispensing equipment manufacturers

Applicable Dispenser Makers

Cartridge Tube 200gr 5pcs.

Cylinder Cartridge 200gr 5pcs. For our filling machines only

Point hose Syringe A type 30cc 12pcs. FYUSHU MATSUSHITA, HITACHI, TDK,

CITIZEN, SONY, YAMAHA

Syringe B type 30cc 12pcs. FUJI

Syringe C type 30cc 12pcs. Panasert (Long: MO)

Syringe D type 20cc 12pcs. Panasert (Short: MK, MV)

Syringe E type 10cc 12pcs. TENRYU, CASIO, JUKI, OKANO

Canned PLASTIC JAR 500gr 6pcs. For screen printing